这篇文章主要介绍了postgresql 计算两点距离的2种方法小结,具有很好的参考价值,希望对大家有所帮助。一起跟随小编过来看看吧。
postgresql计算两点距离
下面两种方法:
select
ST_Distance(
ST_SetSRID(ST_MakePoint(115.97166453999147,28.716493914230423),4326)::geography,
ST_SetSRID(ST_MakePoint(106.00231199774656,29.719258550486572),4326)::geography
),
ST_Length(
ST_MakeLine(
ST_MakePoint(115.97166453999147,28.716493914230423),
ST_MakePoint(106.00231199774656,29.719258550486572)
)::geography
)
备注:
ST_GeomFromText('LINESTRING(115.97166453999147 28.716493914230423,106.00231199774656 29.719258550486572)')与
ST_MakeLine(
ST_MakePoint(115.97166453999147,28.716493914230423),
ST_MakePoint(106.00231199774656,29.719258550486572)
)等价
ST_GeomFromText('POINT(115.97166453999147 28.716493914230423)',4326)与
ST_SetSRID(ST_MakePoint(115.97166453999147,28.716493914230423),4326)等价
ST_SetSRID(ST_MakePoint(115.97166453999147,28.716493914230423),4326)::geography与
Geography(ST_SetSRID(ST_MakePoint(115.97166453999147,28.716493914230423),4326))、
ST_GeographyFromText('SRID=4326;POINT(115.97166453999147 28.716493914230423)')等价
(::geography是postgis中的转换类型语法,把geometry转成geography)
补充:postgresql计算两点欧式距离(经纬度地理位置)
我就废话不多说了,大家还是直接看代码吧~
create or replace function getdistance
(
lon1 numeric,
lat1 numeric,
lon2 numeric,
lat2 numeric
)
returns int
as
$body$
declare
v_distance numeric;
v_earth_radius numeric;
radLat1 numeric;
radLat2 numeric;
v_radlatdiff numeric;
v_radlngdiff numeric;
begin
--地球半径
v_earth_radius:=6378137;
radLat1 := lat1 * pi()/180.0;
radLat2 := lat2 * pi()/180.0;
v_radlatdiff := radLat1 - radLat2;
v_radlngdiff := lon1 * pi()/180.0 - lon2 * pi()/180.0;
v_distance := 2 * asin(sqrt(power(sin(v_radlatdiff / 2), 2) + cos(radLat1) * cos(radLat2) * power(sin(v_radlngdiff/2),2)));
v_distance := round(v_distance * v_earth_radius);
return v_distance;
end;
$body$
language 'plpgsql' volatile;
create or replace function getdistance
(
i_lngbegin real,
i_latbegin real,
i_lngend real,
i_latend real
)
returns float
as
$body$
/*
*
* select getdistance_bygispoint(116.281524,39.957202,117.648673,38.42584) as distance;
* */
declare
v_distance real;
v_earth_radius real;
v_radlatbegin real;
v_radlatend real;
v_radlatdiff real;
v_radlngdiff real;
begin
--地球半径
v_earth_radius:=6378.137;
v_radlatbegin := i_latbegin * pi()/180.0;
v_radlatend := i_latend * pi()/180.0;
v_radlatdiff := v_radlatbegin - v_radlatend;
v_radlngdiff := i_lngbegin * pi()/180.0 - i_lngend * pi()/180.0;
v_distance := 2 * asin(sqrt(power(sin(v_radlatdiff / 2), 2) + cos(v_radlatbegin) * cos(v_radlatend) * power(sin(v_radlngdiff/2),2)));
v_distance := v_distance * v_earth_radius*1000;
return v_distance;
end;
$body$
language 'plpgsql' volatile;
v_distance; end;$body$ language 'plpgsql' volatile;
文章来源:脚本之家
来源地址:https://www.jb51.net/article/204788.htm
申请创业报道,分享创业好点子。点击此处,共同探讨创业新机遇!